Fidelio HTL9100/12 User Manual download pdf (Page 17)

15

English

EN

Surround speakers

• Speaker impedance: 8 ohm

• Speaker drivers: 2 x 63.5 mm (2.5") full

range

• Dimensions (WxHxD):

191 x 73 x 156 mm

• Weight: 0.7 kg/each

Subwoofer

• Power supply: 110-240 V~, 50/60 Hz

• Power consumption: 30 W

• Standby power consumption: ≤ 0.5 W

• Impedance: 4 ohm

• Speaker drivers: 1 x 165 mm (6.5") woofer

• Dimensions (WxHxD):

200 x 510 x 201 mm

• Weight: 4.9 kg

Wall mount

• Dimensions (WxHxD):

40 x 100 x 26.5 mm

• Weight: 0.1 kg/each

Remote control batteries

• 2 x AAA-R03-1.5 V

Standby information

• When the product remains inactive for

15 minutes, it automatically switches to

standby or networked standby.

• The power consumption in standby or

networked standby is less than 0.5W.

• To deactivate Bluetooth connection, press

and hold the Bluetooth button on the

remote control.

• To activate Bluetooth connection, enable

Bluetooth connection on your Bluetooth

device, or enable Bluetooth connection via

the NFC tag (if available).

7 Troubleshooting

Warning

•

Risk of electric shock. Never remove the casing of the

product.

To keep the warranty valid, never try to repair

the product yourself.

If you have problems using this product, check

the following points before you request service.

If you still have a problem, get support at

www.philips.com/support.

Main unit

The buttons on the SoundBar do not work.

• Disconnect the SoundBar from the power

supply for a few minutes, then reconnect.

Sound

No sound from SoundBar speakers.

• Connect the audio cable from your

SoundBar to your TV or other devices.

However, you do not need a separate

audio connection when:

• the SoundBar and TV are connected

through HDMI ARC connection, or

• a device is connected to the HDMI IN

connector on your SoundBar.

• Reset your SoundBar to its factory settings.

• On the remote control, select the correct

audio input.

• Make sure that the SoundBar is not muted.

No sound from the wireless surround

speakers.

• Wirelessly connect the speakers to the

main unit (see 'Pair up with the speakers'

on page 8).

• Dock the wireless surround speakers into

the main unit to charge the battery.

HTL9100_12_UM_V6.0.indb 15 4/24/2015 11:18:26 AM

1 2 ... 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments