Fidelio HTL9100/79 User Manual download pdf (Page 14)

12

EN

Synchronize picture and sound

If the audio and video are not synchronized,

delay the audio to match the video.

1 Press AUDIO SYNC +/- to synchronize

the audio with the video.

• AUDIO SYNC + increases the sound

delay, and AUDIO SYNC - decreases

the sound delay.

» When you change the value of sound

delay, the more value/delay you set,

the more indicators on the main unit

light up.

Night mode

For quiet listening, decrease the volume of loud

sounds when audio is played. Night mode is

only available for Dolby Digital soundtracks.

1 Press NIGHT MODE ON/OFF to turn

night mode on or off.

» When night mode is turned on, the

V.SURR indicator blinks once.

» When night mode is turned off, the

V.SURR indicator blinks twice.

Note

• If auto volume is set to turned on, you cannot enable

the night mode.

MP3 player

Connect your MP3 player to play your audio

les or music.

What you need

• An MP3 player.

• A 3.5mm stereo audio cable.

1 Using the 3.5mm stereo audio cable,

connect the MP3 player to the AUDIO-IN

connector on your SoundBar.

2 Press AUDIO-IN.

3 Press the buttons on the MP3 player to

select and play audio les or music.

• On the MP3 player, it is recommended

to set the volume in the range of 80%

maximum volume.

Play music via Bluetooth

Through Bluetooth, connect the SoundBar with

your Bluetooth device (such as an iPad, iPhone,

iPod touch, Android phone, or laptop), and then

you can listen to the audio les stored on the

device through your SoundBar speakers.

What you need

• A Bluetooth device which supports

Bluetooth prole A2DP, and with Bluetooth

version as 2.1 + EDR.

• The operational range between the

SoundBar and a Bluetooth device is

approximately 10 meters (30 feet).

1 Press Bluetooth on the remote control to

switch the SoundBar to Bluetooth mode.

» The Bluetooth indicator blinks.

2 On the Bluetooth device, switch on

Bluetooth, search for and select Philips

HTL9100 to start connection (see the

user manual of the Bluetooth device on

how to enable Bluetooth).

» During connection, the Bluetooth

indicator blinks.

3 Wait until you hear a beep sound from the

SoundBar.

» The Bluetooth indicator lights up.

» If the connection fails, the Bluetooth

indicator blinks continually.

4 Select and play audio les or music on

your Bluetooth device.

• During play, if a call is coming, music

play is paused. Play resumes when the

call ends.

• If music streaming is interrupted, place

the Bluetooth device closer to the

Soundbar.

HTL9100_79 94_UM_EN.indd 12 7/30/2015 3:00:28 PM

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments